KAP Industries Fire Extinguisher Bracket and Fire Extinguisher Bundle Landcruiser 70# Pre DPF - KI-LC-79-PREDPF

In Stock

$108.00 $88.00

Or 4 payments of $22.00 with AFTERPAY

Product Details

Kit suits Toyota Landcruiser 79 (99-16)

Kit Includes:

  • KAP Industries Fire Extinguisher Bracket
  • 2 x M5 High Tensile Steel Locknuts
  • 2 x M5 High Tensile Steel Hex Bolts
  • Fir Extinguisher

The Powder Fire Extinguisher ABE, distinguished by a white colored band around the top of the cylinder, is the most widely used type of fire extinguisher suited for fires occurring in the car/home or small office house, boat, garage, car, or caravan. They discharge a fine powder that absorbs fuel molecules, depriving the fire of a fuel source.

Dry Chemical Fire Extinguishers are the most popular fire extinguishers in Australia, this is due to their effectiveness to a wide variety of different classes of fire, paired with the low cost per unit. Also known as DCP, ABE, or BE Fire Extinguishers, they contain dry chemical powder as the extinguishing agent. Note: All fire extinguishers must be inspected every 6 months. Regular maintenance is essential to ensure your extinguisher will work correctly when required. After 5 years your extinguisher must be pressure tested.

Fire Extinguisher Features:

  • Certified and approved to AS/NZS 1841.5
  • Fire Rating: 1A:20B:E
  • Operating Pressure: 11 bar
  • Powder Type: ABE 70% MAP
  • Dimensions: 100mm x 370mm
  • Cylinder Volume: 1.0L
  • Cylinder Thickness: 1.0mm
  • Test Pressure:27 bar
  • Full Weight:2.5kg
  • Model: FB10ABE

Partnered with the KAP Industries Fire Extinguisher Bracket this pack could save your life and severely limit damage to your rig by making the fire exinguisher easily accessible in the vehicle. Keep your safety equipment within arm’s reach, Kap industries fire extinguisher bracket mounts directly to your seat, unclip with one finger, ready to go, be prepared at all times!

Kap Industries fire extinguisher brackets are tailor-made for each 4wd model. Kap Industries fire extinguisher brackets are made from steel and then powder coated black. All fire extinguisher brackets have a series of slots laser cut into them, so no drilling is required to fix a fire extinguisher to the bracket. It’s a 5-minute install!

Every Fire Extinguisher Bracket Includes:

  • 1 x Model Specific Fire Extinguisher Bracket
  • 2 x M5 High Tensile Steel Locknuts
  • 2 x M5 High Tensile Steel Hex Bolts

Installation is easy!

  • Step 1 - With a Torx T50 tool undo the front and rear seat bolts
  • Step 2 - Lift up the front of the seat
  • Step 3 - Bolt extinguisher cage to the Bracket
  • Step 4 - Slide the bracket under the seat and bolt it down again

Every Kap Industries Fire Extinguisher Bracket is made to specifically mount each vehicle model, designed to bolt straight in, without the need to drill into the vehicle’s bodywork.

Designed in CAD, laser-cut from lightweight steel and powder coated, made down in Melbourne, each fire extinguisher bracket fits perfectly, does not require any seat adjustment, and is non-obtrusive to the driver or passenger.

Please Note:

  • Seat bolts are easily cross threade.
  • Kap Industries Brackets are only to be used with metal strapped extinguisher cages
  • Please be careful when installing. Kap Industries takes no responsibility for incorrect install

Delivery Estimate

Type in your postcode or suburb to get an estimate on time for delivery.

Got Questions?

We are here to help.

Contact Us

Related Products